A useful watercolour paint review begins long before the first wash is laid down. The question is not simply whether a colour looks attractive in the pan, or even whether it produces a vivid swatch. Serious painters need to know what the paint is made from, how it releases into water, how it behaves across paper, and whether its character remains dependable when it becomes part of a working palette.
Watercolour is unusually revealing. A modest difference in pigment concentration, particle size, binder balance or transparency can alter a passage completely. It affects the clarity of a glaze, the edge of a wet wash, the texture left in the paper grain and the number of layers a painting will tolerate. For that reason, paint should be assessed as a material with specific possibilities, rather than ranked by a single score.
What a Watercolour Paint Review Should Test
A proper review considers performance in several conditions, not just a heavy, saturated swatch. Begin with a dry pan or a freshly squeezed well. Does the colour rewet readily with a damp brush, or does it require prolonged working? A professional watercolour should release with control. Immediate release can be useful for expressive work, but too much can make it difficult to judge strength in a pale wash. Conversely, a colour that resists rewetting may slow down a painter who works repeatedly from a settled palette.
Next, make a graded wash on good quality watercolour paper. Pull the colour from a full mixture into clean water and observe whether the wash remains even, separates into particles, or develops hard-edged blooms as it dries. None of these outcomes is automatically a fault. A smooth organic pigment may be ideal for clear skies and delicate glazing, while a heavily granulating earth or mineral colour can bring welcome movement to stone, foliage and weathered surfaces. The useful question is whether the result is characteristic of the pigment and predictable in use.
A review should also test a colour at three strengths: a pale tint, a middle wash and near-full concentration. Some paints appear transparent when diluted but become markedly opaque in a rich mixture. Others remain luminous even at their strongest. This distinction matters when planning layered work, preserving light through glazing, or using negative painting to build form.
Pigment Information Comes Before Colour Names
A colour name alone is not enough to explain a paint. Names such as Rose, Blue, Green or Yellow may describe an appearance, but they do not identify the material responsible for it. The Colour Index pigment code, where supplied, gives the painter a much clearer basis for comparison.
Single-pigment colours are often especially valuable in a compact palette because their mixing behaviour is easier to learn. A single-pigment yellow and a single-pigment blue will not necessarily make a clean green together, but the result is more intelligible than a mixture of several undisclosed components. You can trace why a neutral has emerged, adjust the ratio with purpose and reproduce it later.
Multi-pigment colours are not inherently inferior. They may offer a carefully balanced convenience mixture, a particular granulating effect or a useful dark that would be tedious to formulate each time. The trade-off is that they can become less predictable when combined with other colours. In a watercolour paint review, this is where pigment disclosure has practical value: it allows the artist to decide whether a colour belongs in the palette, rather than merely admiring it in isolation.
Lightfastness deserves equal attention. A fugitive colour can be a deliberate choice for sketchbooks, studies or reproduction-led work, but it is a different proposition in a painting intended to be displayed for years. Review the stated permanence rating alongside the pigment composition, particularly for delicate pinks, purples and some bright reds. The most vivid colour on a chart is not always the soundest long-term choice.
Transparency, Granulation and Staining Are Working Qualities
These three terms are often treated as marketing shorthand. In practice, they describe how a pigment can shape a painting.
Transparency concerns the degree to which light passes through a layer and reflects from the paper below. Transparent colours reward glazing and preserve optical depth. Semi-opaque and opaque colours can be equally useful for softening a passage, modifying a wash or introducing a more body-colour-like presence. A review should test transparency in a wash laid over a dry, dark stroke, rather than relying only on a symbol on the label.
Granulation occurs when pigment particles settle into the texture of the paper rather than drying as a uniform film. On rough or cold pressed paper, a granulating colour may create striking variation; on hot pressed paper, the effect may be quieter. It is not simply decorative. Granulation can suggest distance, atmosphere, mineral surfaces and natural irregularity without repeated brushwork. However, painters seeking perfectly flat architectural washes may prefer smoother pigments for certain passages.
Staining describes a pigment’s tendency to bind strongly to paper fibres. Staining colours can be excellent for repeated glazing and intense, clean passages, but lifting back to recover a highlight becomes more difficult. Non-staining colours are often more forgiving and can be lifted, softened or reworked after drying. Neither approach is universally better. The right balance depends on whether your method relies on reserve whites, lifting, direct layering or a combination of all three.
Judge Mixing by the Palette You Actually Use
Testing every colour against every other colour produces more charts than understanding. Instead, assess a prospective paint beside the colours already doing work in your palette. If you are considering a new blue, mix it with your regular warm and cool yellows, a red, and any earth colour that anchors your neutrals. Observe not only the resulting hue, but whether the mixture retains clarity and whether it separates as it dries.
A balanced palette does not require every possible hue. It requires deliberate temperature choices and a grasp of each colour’s role. A cool, transparent yellow may make luminous spring greens with a cool blue, while a warmer yellow may produce more natural olive mixtures with an earthier blue. A red with a bluish bias can be indispensable for violets but may make restrained landscape neutrals less easily than a warmer red.
This is why comparing apparent equivalents matters. Two paints may look similar in a swatch yet behave very differently when mixed, diluted or layered. Tools such as a colour comparison chart, an equivalent finder or a mixing studio are most useful when they help you ask better material questions: which pigment am I replacing, what handling quality will change, and what new mixtures will this make possible?
Tube, Pan and the Economics of Paint
Pan and tube watercolour are not separate grades of paint by definition. The choice is principally about working method. Pans are portable, orderly and well suited to painters who build a familiar palette over time. Tubes make it easier to prepare generous washes, work at scale and control the proportions of fresh mixtures.
When judging value, price per pan or tube is a poor starting point. Consider pigment load, the strength of the colour in a wash, the size of the tube, and how much paint is needed to reach the desired intensity. A highly pigmented paint may initially appear costly but allow a painter to make a substantial range of tints and washes from a small amount. That does not mean every expensive colour is justified. Some pigments are naturally costly, while others are readily available. The point is to judge value through performance and suitability, not through the first figure on the label.
Michael Harding watercolours are made with this pigment-led approach in mind, giving painters clear material information from which to build a considered palette rather than a collection of attractive names.
A Small Testing Method That Reveals a Great Deal
Use one sheet of the paper you normally paint on, preferably cut into manageable strips. For each colour, make a full-strength stroke, a graded wash, a wash over a waterproof dark line, and a lifted area once dry. Then combine it with two or three established palette colours. Label every test with the colour name and pigment code.
Return to the sheet the following day. Freshly painted watercolour can be persuasive; dry watercolour gives the more useful evidence. Look for dulling, unexpected opacity, loss of granulation, uneven washes or mixtures that have become greyed more quickly than anticipated. This record will become far more valuable than a row of isolated colour dots.
The best paint is not the one that behaves identically in every situation. It is the one whose pigment character you understand well enough to use with intention. Give each new colour a place in a real painting before granting it a permanent place in the palette.

























































